Our trailer units are towable (see transport details below) and hold two self-contained shower unit, each unit has its own side entry door and contains a shower, lighting, hand basin, mirror, built in seating, a power outlet for hair dryers/shavers, clothes hooks and non-skid flooring.

Gas Requirements

Hot water is heated via 1 continuous flow hot water heating unit requiring 2 x 9kg LP Gas bottles which are supplied with the unit.

Power Requirements

A six metre electrical lead with a normal 3 pin outlet is supplied with the unit to operate the water pressure pump, steam extraction fans, lighting and power outlets. The trailer has full RCD protection.

Water Requirements

The water required to feed the unit is 25 litres per minute and is fed via a 6m flexible hose, supplied with the unit, from a water source such as a hose tap.

Waste water is discharged via a 40mm BSP outlet and Six metre flexible waste hose which is supplied with the unit. Water needs to be disposed of in a Local Authority Bylaw approved manner e.g. gully trap, soak pit, manhole.


The unit can be towed like a normal trailer by a 2.5L tow vehicle with a certified tow bar with an inch and 7 eighths or 50mm tow ball. Pick up and return from one of our nation-wide depots, alternatively, Portashowers can arrange transport to and from your site as well as installation at an additional cost.


Detailed installation instructions are provided with our trailers prior to collection or delivery.

  • Height:  2.6 metres
  • Length: 3.1 metres             
  • (+ Towbar 1.6 metres)
  • Width: Weight:  2.05 metre
  • 1.18 tonnes

Our trailer units are easily towable and hold two self-contained shower cubicles.  Each cubicle has a shower, hand basin, mirror, built in seating, changing area and power outlet for hair dryers/shavers, Hot water is heated by LP Gas and a 240V power supply is required for lighting.